© ETON SYSTEMS

Station Overview

🔎

The station overview screen shows an overview of the Eton work stations. This is useful for viewing a complete overview status of the Eton line stations, by selecting the various options from the drop down lists.

The information is shown as follows:-

There are 3 'drop down' lists:

  • The Color Rule
  • The Station Group
  • The Route
  • The Article

The Color Rules:

  • Work mode
  • Logged in
  • Work load
  • Rail load
  • Blocked rails

The Station Group:

  • Defined Station Groups

Route:

  • View Station Groups by Route

Article:

  • View Station Groups by a chosen Article's Route

Configuration Steps

  1. Start by choosing your desired Station Group or Route and a Color Rule (optional). To clear a value press the x inside of the dropdown box.
    Read More: Go to Dropdowns section.

  2. Choose fields to display by clicking the Select Display Fields button Display Fields Icon to open the Display Fields panel. Choose the desired fields to display.
    Read More: Go to Select Display Fields Panel section.

  3. Choose grid or line view mode by clicking the icon to the far right (Icon with 3 stacked horizontal lines or four squares)

  4. Save your preset by clicking the floppy disk icon. Give your preset a name and then click Ok.

  5. Load a saved preset by choosing the Bookmark icon next to the floppy disk icon. Choose a preset by clicking it.

Station Overview - Dropdowns

Station Overview - Color Rules

Workmode

  • ⚪Grey: No Workmode registered at station
  • 🔴Red: In Off Standard and No destination available or Out of Work
  • 🟠Orange: Repair Own or Others fault
  • 🟢Green: In On Standard Production

Logged In

  • ⚪Grey: Unmanned (Station in Automatic and is a buffer or bridge)
  • 🔴Red : Not Above and no Operator Id was found
  • 🟠Orange: Operator in Off Standard logged in
  • 🟢Green: Operator in On Standard logged in

Work Load

  • 🔴Red: Station workload is larger than the Split Workload Limit system setting
  • 🟢Green: Station workload is smaller than the Split Workload Limit system setting

Rail Load

  • 🔴Red: Station load percentage under 20% or over 80%
  • 🟢Green: Station load percentage between 20 -80%

Blocked Rails

  • 🔴Red: All rails blocked on station
  • 🟠Orange: Some rails blocked on station
  • 🟢Green: No rails blocked on station

Station Overview - Select Display Fields Panel

  • Fields can be chosen from the Available Fields column and moved to the Selected Fields column
    by either drag & drop, double-click or select a row and use the buttons pointed in the right direction.

  • In the Selected Fields column rows can be reordered by drag & drop or
    selecting a row and then moving it up or down by pressing the
    corresponding button on the right side.

  • Rows that contain a padlock icon are locked to their positions which
    means that even if they are moved in the column they will not change
    position in the station grid.

Station Overview - Display Fields

  • Article is the Article Number of the current carrier in work position.
  • Blocked Rails shows a "forbidden"-icon🚫on the corresponding rail's Rail Load if the rail is blocked. This display field is dependent on the Rail Load display field.
  • Carrier is the Carrier id of the carrier in work position.
  • Description is the current stations set description.
  • Efficiency is the current station's logged in operator's calculated efficiency for the day.
    For calculation see OperatorStatus.
  • Last Login shows time and date of the last login.
  • Name of the Logged in Operator (FirstName + LastName).
  • Ongoing Operation is the operation currently ongoing at the carrier in work position.
  • Operator is the logged in Operator's Alias.
  • Order shows the Order number of the carrier in work position.
  • Overload Switch shows a "radioactive"-icon☢️on the corresponding rail's Rail Load if the rail's overload switch is engaged. This display field is dependent on the Rail Load display field.
  • Performance is the current station's logged in operator's calculated performance for the day.
    For calculation see OperatorStatus.
  • Portrait is the portrait of the operator set on their user profile.
  • Rail Content shows which articles are currently on the rails
    Rail Content Pro-Tip: When selecting both use them with Rail Content above Ordered in the list.
  • Rail Content (Ordered) shows incoming articles to the rails.
  • Rail Load shows how many carriers are on the rail and it's capacity.
  • Rail Load (Total) shows a total for Rail Load for all rails on that station.
  • Work Load possible values are: SMV, Piece Rate, Product Count, Carrier Count.
  • Work Mode shows the current work mode of the operator logged in at the station.
  • Work Mode Set shows the current work mode set of the operator logged in at the station.