The line is controlled by a special terminal connected to the Line Server. This allows a user with the correct permissions to control the headline.
This terminal is usually marked "Line #"
Terminal Commands
These are the most commonly used commands on the line server.
If the permissions for line control are not enabled on the anonymous role, then you have to first log in to the line server in order to use these commands. See the Basic Operator guide.
Start line
Starts the line
This command also reenables auto start of the line
Stop line
Stops the line and forces manual start via line server
A stopped line can only be restarted from line server via The 1 F8 command.
Reset line after an error
Resets the line after it has stopped due to a motor/line error.
⚠️ Repeatedly resetting a stuck line may break the drive belt. If resetting once does not work, perform a visual inspection of the line to find the problem point and resolve the issue mechanically.